New Zealand markets open in 4 hours 20 minutes
  • NZX 50

    11,065.71
    -134.33 (-1.20%)
     
  • NZD/USD

    0.5598
    -0.0133 (-2.32%)
     
  • ALL ORDS

    6,678.70
    -81.90 (-1.21%)
     
  • OIL

    79.74
    -1.49 (-1.83%)
     
  • GOLD

    1,668.30
    -0.30 (-0.02%)
     

The Global Frequency Converter Market size is expected to reach $28.7 billion by 2028, rising at a market growth of 6.1% CAGR during the forecast period

·7-min read
ReportLinker
ReportLinker

A frequency converter is a mechanically controlled electromechanical device that changes the frequency of an alternating current. Apart from utility frequency, which varies by country and is either 50 Hz or 60 Hz, frequency converters allow the equipment and gadgets to work at their standard frequency.

New York, Aug. 18, 2022 (GLOBE NEWSWIRE) -- Reportlinker.com announces the release of the report "Global Frequency Converter Market Size, Share & Industry Trends Analysis Report By Type, By End User, By Regional Outlook and Forecast, 2022 - 2028" - https://www.reportlinker.com/p06315013/?utm_source=GNW
In many sectors, frequency converters are used to adjust the speed and torque of AC motors based on the demands of the load. Static and rotating frequency converters are the two types of frequency converters used in businesses for frequency conversion.

The growth of the frequency converter market is expected to be primarily driven by the development of high-speed rails, which need frequency converters to regulate the speed of engines and fans, as well as the widespread use of equipment in aerospace and defense sectors for monitoring axes. The modernization of electronic infrastructure serve as the main market drivers for frequency converters worldwide. High electrical efficiency is necessary right now, and using a frequency converter satisfies this need.

Along with that, the growing trend of offshore wind power generation is accelerating the overall demand for frequency converters. The industry’s ongoing product advancements, such as the incorporation of sophisticated output filters that block common mode currents while also transforming phase-to-phase voltage into a sinusoidal signal, also boost the market’s expansion.

Solid-state and rotational frequency converters are the two types of frequency converters. It is used by frequency converters to regulate the pump’s speed. Both mechanical, as well as electrical loads, can be decreased with the use of frequency converters, which prolongs the life of motors, pumps, and other electrical and mechanical equipment. The input AC voltage is transformed into rotating mechanical force by the rotary frequency converter. The generator receives this rotational force via rotating mechanical strength. The generator transforms mechanical energy into AC electricity as an output.

COVID-19 Impact Analysis

The outbreak of the coronavirus has a significant influence on a variety of businesses and nations around the world. The growth rates of industries like construction and building, oil and gas, transportation, pharmaceuticals, energy, food processing, electronics, textiles, and others have decreased as a result of the economic shutdown. Furthermore, the COVID-19 impacted countries’ decreased demand for power is predicted to hinder the expansion of the frequency converter market in 2020. Europe’s major economies, including Germany, France, Spain, Italy, and others, are enforcing stringent regulations to stop the Coronavirus from spreading in their respective areas. As a result, there is a significant impact on the frequency converter supply chain and demand, which in turn restrained the market’s growth until the start of production, and manufacturing worldwide.

Market Growth Factors

Reduce Disruptions To Power Lines

The power distribution system connected to the motor is severely taxed when an AC motor is started across the line and required to supply 300–600% of its full load current. Depending on the size of the motor and the distribution system’s capacity, when the supply voltage drops, it may cause connected sensitive equipment to trip offline because of the low voltage. Sensors, proximity switches, computers, proximity switches, and contactors are some examples of items that are voltage sensitive and may fail if a large AC motor line is started nearby. Since the motor is started at zero voltage and scaled up, variable frequency converters can help in removing this voltage sag.

Need For Water & Wastewater Treatment Facilities

Over the forecast period, it is anticipated that rising freshwater resource depletion coupled with accelerating urbanization and industrialization would drive increased demand for clean water. The need to adhere to severe regulatory laws pertaining to water & wastewater treatment worldwide, together with growing environmental concerns, is expected to support the market. Furthermore, it is projected that the investments in wastewater treatment facilities will gradually rise by the government authorities of different countries. In addition to this, technological development, and population growth have all led to an increase in the demand for fresh and treated water around the world.

Market Restraining Factors

Frequency Converter Are Usually Expensive

Many customers experience "sticker shock" while trying to purchase a frequency converter. Whether the power frequency converter is an electronic (solid-state) unit or a rotary unit (motor-generator set) doesn’t really matter. In addition, the cost disparity amongst vendors is actually fairly minimal. A frequency converter must entirely recreate the power in order to convert the frequency, in contrast to voltage conversion, which merely needs a relatively passive transformer. In a rotary converter, the drive motor transforms incoming electrical energy into mechanical power. The rotational energy is then fed into a generator, where it is transformed back into electrical output. Lots of gear, moving pieces, and costs.

End-User Outlook

Based on end-user, the frequency converter market is segmented into aerospace and defense; power and energy; oil and gas, traction, marine/offshore; process industry and others. The marine/offshore segment procured a significant revenue share in the frequency converter market in 2021. The marine industry, which consists of governmental organizations, shipping firms, cruise lines, auto ferry ports, naval dockyards, harbors, and marina operators, is actively looking for substitute methods of supplying shoreside power for the ships when they berth at the port.

Type Outlook

On the basis of type, the frequency converter market is fragmented into static and rotary. In 2021, the rotary frequency converter segment held the largest revenue share in the frequency market. This is a result of rotary frequency converters being used more frequently in large applications with power ratings of at least 10 kVA. Rotary frequency converters are devices that change the frequency of power. This is accomplished by mechanically and electrically isolating a generator and attaching it to a motor. Direct coupling or coupling with belts and sheaves are both options.

Regional Outlook

Region wise, the frequency converter market is analyzed across North America, Europe, Asia Pacific and LAMEA. In 2021, Asia-Pacific led the frequency converters market with the highest revenue share. This is attributable to a rise in the requirement for a consistent and reliable power supply caused by population growth in Asia-Pacific, particularly in the nations like China, Japan, and India. Industries including oil and gas, power generation, food and beverage, and others are expanding quickly. The Asia-Pacific region’s industrial and manufacturing sectors have seen an increase in automation, which has fueled the development of the frequency converter that is frequently used for timing and synchronization.

The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Siemens AG, ABB Group, General Electric (GE) Co., The Danfoss Group, Aplab Limited, NR Electric Co., Ltd., Magnus Power Pvt. Ltd., KGS Electronics, Georator Corporation, and Advance Electronic Labs., Corp.

Scope of the Study

Market Segments covered in the Report:

By Type

• Rotary

• Static

By End User

• Aerospace & Defense

• Traction

• Oil & Gas

• Marine/Offshore

• Power & Energy

• Process Industry & Others

By Geography

• North America

o US

o Canada

o Mexico

o Rest of North America

• Europe

o Germany

o UK

o France

o Russia

o Spain

o Italy

o Rest of Europe

• Asia Pacific

o China

o Japan

o India

o South Korea

o Singapore

o Malaysia

o Rest of Asia Pacific

• LAMEA

o Brazil

o Argentina

o UAE

o Saudi Arabia

o South Africa

o Nigeria

o Rest of LAMEA

Companies Profiled

• Siemens AG

• ABB Group

• General Electric (GE) Co.

• The Danfoss Group

• Aplab Limited

• NR Electric Co., Ltd.

• Magnus Power Pvt. Ltd.

• KGS Electronics

• Georator Corporation

• Advance Electronic Labs., Corp.

Unique Offerings

• Exhaustive coverage

• Highest number of market tables and figures

• Subscription based model available

• Guaranteed best price

• Assured post sales research support with 10% customization free
Read the full report: https://www.reportlinker.com/p06315013/?utm_source=GNW

About Reportlinker
ReportLinker is an award-winning market research solution. Reportlinker finds and organizes the latest industry data so you get all the market research you need - instantly, in one place.

__________________________

CONTACT: Clare: clare@reportlinker.com US: (339)-368-6001 Intl: +1 339-368-6001